EM powerLED BASIC FX SC LiFePO4 32 W NEW

Combined emergency lighting LED Driver

Product description

  • Combined emergency LED Driver for manual testing
  • For self-contained emergency lighting
  • Can be either used build-in or independent with clip-on strain-relief (see accessory)
  • Max. output power 32 W
  • Nominal life-time up to 100,000 h
  • 5-year guarantee

Functions

  • Adjustable output current between 350 and 700 mA via I-SELECT 2 plugs
  • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
  • Suitable for emergency escape lighting systems acc. to EN 50172
  • 1 or 3 h rated duration depending on connected battery
  • Constant power output in emergency mode

Battery management

  • Intelligent charge system
  • Deep discharge protection
  • Temperature protection
  • Polarity reversal protection for battery provided by 3-pole connector

Batteries

  • LiFePO4 batteries with Tridonic LiFeGuard
  • Temperature-protected
  • Overcharge-/Overdischarge protection
  • Ensures safety in use
  • Up to 8-year design life
  • 3-year guarantee
  • For battery compatibility refer to datasheet, battery selection
Autoscroll for tables
Ordering data
Type (1) Article number Packaging, carton Packaging, pallet Weight per pc.
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 89800687 10 pc(s). 1,000 pc(s). 0.115 kg
Lamp types:
Recessed floor & wallmounted luminaires
High bay luminaires
Linear luminaires
Wide-area luminaires (in-built, remote, pendant)
Approval marks:
IP20
SELV
Short Circuit Proof
110
Emergency Lighting suitable
EAC
doppelte Isolierung
CE
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V (for 48 h)
Typ. rated current (at 230 V, 50 Hz, full load, charging) (1) 185 mA
Max. input power 41 W
Typ. efficiency (at 230 V, 50 Hz, full load, charging) (1) 84 %
λ (at 230 V, 50 Hz, full load, charging) 0.95
Typ. input current in no-load operation (charging) 20 mA
Typ. Eingangsleistung im Leerlauf (ladend) 1.1 W
In-rush current (peak / duration) 4 A / 260 µs
THD (at 230 V, 50 Hz, full load) 14 %
Starting time (at 230 V, 50 Hz, full load) < 500 ms
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Switchover time (AC/EM) < 500 ms
Output current tolerance < 5 %
Max. output current peak (non-repetitive) < 35 %
Output LF current ripple (< 120 Hz) 5 %
U-OUT (including open- / short-circuit and double load) 60 V
Max. open circuit voltage 60 V
Mains voltage changeover threshold According to EN 60598-2-22
Max. casing temperature tc 80 °C
Ambient temperature ta ≤ 25 W (2) -25 ... +50 °C
Ambient temperature ta > 25 W (2) -25 ... +45 °C
Mains surge capability (between L - N) 1.2 kV
Surge voltage at output side (against PE) 2.4 kV
Mains surge capability (between L/N - PE) 2.4 kV
Life-time up to 100,000 h
Dimensions L x W x H 115 x 43 x 30 mm
Autoscroll for tables
Specific technical data
Type Number of battery cells Output current (1) (2) Min. forward voltage Max. forward voltage Max. output power Typ. power consumption (at 230 V, 50 Hz) Typ. current consumption (at 230 V, 50 Hz) I-SELECT resistor value (4)
Min. load (3) Max. load (3) Min. load (3) Max. load (3)
Normal operation
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 350 mA 15 V 50 V 17.5 W 10.0 / 9.0 W 23.0 / 22.0 W 55 / 50 mA 110 / 105 mA
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 400 mA 15 V 50 V 20.0 W 11.0 / 10.0 W 26.0 / 25.0 W 60 / 55 mA 120 / 115 mA 12.50 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 450 mA 15 V 50 V 22.5 W 12.0 / 11.0 W 28.5 / 27.5 W 65 / 60 mA 130 / 125 mA 11.11 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 500 mA 15 V 50 V 25.0 W 12.7 / 11.7 W 31.0 / 30.0 W 67 / 60 mA 135 / 130 mA 10.00 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 550 mA 15 V 50 V 27.5 W 13.7 / 12.7 W 34.0 / 33.0 W 70 / 65 mA 155 / 150 mA 9.09 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 600 mA 15 V 50 V 30.0 W 14.7 / 13.7 W 37.0 / 36.0 W 75 / 70 mA 165 / 160 mA 8.33 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 650 mA 15 V 50 V 32.5 W 15.7 / 14.7 W 39.5 / 38.5 W 80 / 75 mA 180 / 165 mA 7.69 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 700 mA 15 V 46 V 32.5 W 16.0 / 15.0 W 39.2 / 38.2 W 80 / 75 mA 175 / 170 mA 0.00 kΩ
Emergency operation
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 1 15 V 50 V 2.3 W
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 3 15 V 50 V 2.3 W
Document Size Date  
Download all selected files
 Download all selected files
EM_powerLED_BASIC_FX_SC_LiFePO4_32W_en.pdf
Data sheet
2.11 MB 04/12/2019
new
Emergency_Lighting_Overview_EN.pdf
LED emergency lighting system
Solutions for emergency lighting
3.9 MB 07/10/2019
Zertifikate / Konformitätserklärung
Type      Article number      Certificates     
Certificates ()

Strain-relief set 43x30mm Accessories

Approval marks:
MM
Independent gear
SC2 - Protection Class 2
  • ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

  • ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

    ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

  • ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

  • ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

    ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

Product description

  • Optional strain-relief set for independent applications
  • Transforms the LED Driver into a fully class II compatible LED Driver (e.g. ceiling installation)
  • Easy and tool-free mounting to the LED Driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)
  • With screws for short strain-relief (15 x 34 x 30 mm)
  • Overall length = length L (LED Driver) + 2 x 30 mm (long strain-relief set), 2 x 15 mm ( short strain-relief) or long and short strain-relief any combination
  • Standard SC (L = 30 mm) available as non-pre-assembled and pre-assembled
  • Short SC (L = 15 mm) only pre-assembled available
Ordering data
Type Article number Packaging, carton (1) Packaging, outer box Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET 28001168 10 pc(s). 500 pc(s). 0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 300 pc(s). 300 pc(s). 0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 10 pc(s). 500 pc(s). 0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 10 pc(s). 1,200 pc(s). 0.010 kg
CAD / RAY
Type Article number CAD Files
ACU SC 43x30mm CLIP-ON SR SET 28001168 CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 CAD (3.2 MB)

I-SELECT 2 PLUG PRE / EXC Accessories

Product description

  • Ready-for-use resistor to set output current value
  • Compatible with LED Driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1)
  • Resistor is base insulated
  • Resistor power 0.25 W
  • Current tolerance ± 2 % additional to output current tolerance
  • Compatible with LED Driver series PRE and EXC

Example of calculation

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • E96 resistor value used
  • Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base insulation necessary
  • When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)
Ordering data
Type Article number Colour Marking Current Resistor value Packaging, bag Weight per pc.
I-SELECT 2 PLUG 350MA BL 28001110 Blue 0350 mA 350 mA 14.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 375MA BL 28001111 Blue 0375 mA 375 mA 13.30 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 400MA BL 28001112 Blue 0400 mA 400 mA 12.40 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 425MA BL 28001251 Blue 0425 mA 425 mA 11.80 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 450MA BL 28001113 Blue 0450 mA 450 mA 11.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 475MA BL 28001252 Blue 0475 mA 475 mA 10.50 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 500MA BL 28001114 Blue 0500 mA 500 mA 10.00 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 525MA BL 28001960 Blue 0525 mA 525 mA 9.53 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 550MA BL 28001115 Blue 0550 mA 550 mA 9.09 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 600MA BL 28001116 Blue 0600 mA 600 mA 8.25 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 650MA BL 28001117 Blue 0650 mA 650 mA 7.68 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG 700MA BL 28001118 Blue 0700 mA 700 mA 7.15 kΩ 10 pc(s). 0.001 kg
I-SELECT 2 PLUG MAX BL 28001099 Blue MAX MAX 0.00 kΩ 10 pc(s). 0.001 kg
CAD / RAY
Type Article number CAD Files
I-SELECT 2 PLUG 350MA BL 28001110 CAD (712.6 KB)
I-SELECT 2 PLUG 375MA BL 28001111 CAD (712.6 KB)
I-SELECT 2 PLUG 400MA BL 28001112 CAD (712.6 KB)
I-SELECT 2 PLUG 425MA BL 28001251 CAD (712.6 KB)
I-SELECT 2 PLUG 450MA BL 28001113 CAD (712.6 KB)
I-SELECT 2 PLUG 475MA BL 28001252 CAD (712.6 KB)
I-SELECT 2 PLUG 500MA BL 28001114 CAD (712.6 KB)
I-SELECT 2 PLUG 525MA BL 28001960 CAD (712.6 KB)
I-SELECT 2 PLUG 550MA BL 28001115 CAD (712.6 KB)
I-SELECT 2 PLUG 600MA BL 28001116 CAD (712.6 KB)
I-SELECT 2 PLUG 650MA BL 28001117 CAD (712.6 KB)
I-SELECT 2 PLUG 700MA BL 28001118 CAD (712.6 KB)
I-SELECT 2 PLUG MAX BL 28001099 CAD (712.6 KB)

Test switch EM2 Accessories

Approval marks:
RoHs

Product description

  • For connection to the emergency lighting unit
  • For checking the device function
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
Test switch EM 2 89805277 25 pc(s). 600 pc(s). 0.009 kg
CAD / RAY
Type Article number CAD Files
Test switch EM 2 89805277 CAD (1009.0 KB)

Status indication green LED EM Accessories

Approval marks:
RoHs

Product description

  • A green LED indicates that charging current is flowing into the battery
Ordering data
Type Type Article number Packaging, bag Packaging, carton Weight per pc.
LED EM green 89899605 25 pc(s). 200 pc(s). 0.011 kg
LED EM green, ultra high brightness 89899756 25 pc(s). 200 pc(s). 0.012 kg
CAD / RAY
Type Article number CAD Files
LED EM 89899605 CAD (579.9 KB)
LED EM 89899756 CAD (579.9 KB)

Verlängerungskabel LiFePO4 Accessories

Product description

  • Extension cable for LiFePO4 batteries
  • Cable length 500 mm
  • 3-pole plug connection
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
EXTENSION CABLE LiFePO4 500mm 28002461 25 pc(s). 200 pc(s). 0.01 kg
Autoscroll for tables
EPD
Type (1) Article number Environmental Product Declaration (EPD)
EM pLED BASIC FX 102 SC LiFePO4 32W 50V 89800687 EPD