I-SELECT 2 PLUG PRE / EXC Sets

General

  • Set packaging

    Set packaging

Product description

  • Ready-for-use resistor to set output current value
  • Compatible with LED Driver featuring I-select 2 interface; not compatible with I-select (generation 1)
  • Resistor is base isolated
  • Resistor power 0.25 W
  • Current tolerance ± 2 % additional to output current tolerance
  • Compatible with LED Driver series PRE and EXC

Example of calculation

  • R [kΩ] = 5 V / I_out [mA] x 1000
  • Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base isolation necessary
  • When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)
Autoscroll for tables
Ordering data
Type Article number Weight per pc.
High Range Current I-SELECT 2 PLUG Set 28002044 0.032 kg
Mid Range Current I-SELECT 2 PLUG Set 28002043 0.032 kg
Low Range Current I-SELECT 2 PLUG Set 28002042 0.032 kg
Approval marks:
CE
ENEC
Technical data
Power 0.25 W
Resistor value tolerance 1 %
Current tolerance additional to output current tolerance ± 2 %
Autoscroll for tables
Document      Size       Date       
Download all selected files Download all selected files
I-SELECT_2_PLUG_PRE_EXC_Sets_en.pdf
Data sheet
284 KB 20/10/2017
new
Zertifikate / Konformitätserklärung
Type      Article number      Certificates     
Certificates ()
Autoscroll for tables